Automatic Conveyor and Drive Belt / Tape Skiving Machine 600mm
Automatic Skiving machine enables the ends of transmission belts to be narrowed for high quality splicing. Then connect two ends of belt by splice press.
Our machine can meet your demands for different belt in different thickness, fully automatic and easy operation.
- For max belt width: 600mm
- For belt thickness: 0.5mm - 8mm
- Operation : Fully - Automatic
- Machine material: Stainless steel
- High quality rollers with long service life
- Machine can meet your demands for different belt in different thickness, can record 20 types belt parameter.
- Belts can be skived one at a time or lined up to skive several at once.
- Working voltage: 220V 1Phase or according to your request.
1. Simple machine structure and there no need big working area.
2. The width of the working area max is 600mm, belts can work together. Improve work efficiency and reduce work time.
3. Diamond rollers, longer operation life.
4. Easy operation control panel.
6. 20 kinds of conveyor belt skiving parameters can be customized and data can be stored. Convenient for you next operation, no need set it again.
7. Optional vacuuming device: If your factory have equipped with a vacuum cleaner, you can connect the machine for testing; if not, you can use an air gun for dust removal.
8. Fully automatic operation with higher precision.
9. The speed of the machine rollers can be adjusted, different speeds can be adjusted according to different needs. Ensure the quality of the skiving belt.
The belt after skiving: